Blog

How to do the lubrication and maintenance of the concrete batching plant parts 2018-06-08 09:32:50

In order to achieve good lubrication of concrete batching plant parts, the following points must be noted:


1)In accordance with the provisions of the instructions for the lubrication of the parts of the concrete batching plant, add appropriate viscosity oils to each site of the mixing plant on schedule and on time.


2)The amount of lubricating oil must be kept adequate, and the oil layer added to the oil tank should reach the level referred to in the mooring standard. The amount of oil added to the high-speed rotating rolling bearing should be appropriate, not too much or too little, otherwise it will be damaged by heat.


3)The lubricating oil must be very pure and clean. It must not contain impurities, dust, swarf, moisture, etc. to prevent damage to the lubrication and damage to the surface of parts of the concrete batching plants.


4)Lubrication oil in the oil tank should be replaced regularly as specified in the instruction manual of the concrete batching plant.


5)Oily eyes, oil rakes, etc. must be kept closed to prevent intrusion of dust, debris, and thick cooling.


To do a good quality project, a good mechanical helper is indispensable. Therefore, it is necessary to do a good job in the lubrication of the concrete mixing plant parts.

China Professional Concrete Batching Plant Supplier

(XDM concrete batching plant uses a high-quality automatic lubrication system)

Previous Post Next Post
Newsletter

Sign up receive company information

Copyright © 2015-2024 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com

whatsapp : 008615905062290

Tel : 008615905062290

Email : xd@xdmac.com

contacts Home