Factors causing quality problems in commercial concrete production and countermeasures 1 Quality control of raw materials If you want to make a good product, you must have good parts. For example, BMW is made up of thousands of parts. If its parts are inferior, there is no famous brand car. Therefore, we should start with raw materials to improve quality. The raw materials of commercial concrete a...
After the concrete is poured and tamped, it can gradually set and harden mainly because of the cement hydration, which requires appropriate temperature and humidity conditions. Therefore, in order to ensure that the concrete has appropriate hardening conditions and its strength continues to grow, the concrete must be cured. For the poured concrete, the natural curing shall be started before the fi...
Three common problems in ready mix concrete batching plant Problem 1: The sand and gravel are mixed and the bottom of the material is seriously polluted In many ready mix concrete batching plants, sand and gravel are mixed, some of which even have no retaining wall, and some of which are stacked higher than the retaining wall, leading to mixing; Some of the sand and gravel outside the retai...
Today, the sustainable development has been deeply rooted in the hearts of the people. The improvement of durability and the utilization of industrial and mining waste slag have become two major themes of concrete scientific research.With the increasing requirements for high-strength and high-performance concrete, the application technology of superfine powder of admixture has been paid more and m...
Notice to concrete batchinging plant: what kind of load cell can replace each other Q: What load cell can replace each other? How do load cell of different brands replace each other? A: To replace the load cell, the rated load, sensitivity and output impedance in the technical parameters must be the same. In the concrete batching plant, no matter what structu...
Concrete measures to optimize the mix ratio of high performance concrete Construction industry is a part closely related to people's life and production process. The safety and quality of building structure also directly affects the quality of life and safety of users.The excessive desire of many construction enterprises for the economic benefits of construction leads to the reduction of the abili...
1. What should we do when the raw materials cannot be stopped immediately and the supply of concrete cannot be interrupted? At the same time of contacting the raw material supplier, special personnel must be assigned to control the mixing water consumption and on-site concrete curing monitoring to prevent the construction site from adding water by itself. If necessary, the water binder ratio shall...
When the concrete mixing plant works, it must ensure that the electrical system can keep up with the work flow. Therefore, the performance requirements of the electrical system are also very high. What are the specific requirements? I will introduce them below. 1. During the production of the concrete batching plant, the entire work flow of the electrical control system is required to be ab...
Today, we are in an era of rapid development of science and technology. All walks of life are changing to adapt to the times. In the concrete industry we are familiar with, various changes are also in full swing. 1. Architectural planning In order to build a concrete mixing station in line with the current development trend, the building planning at the beginning of the station is very important. ...
Friendly Links :
Copyright © 2015-2023 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com