1.Control room maintenance check The control room is the base of the concrete mixing plant. It is equivalent to the human brain. The control room has electrical components such as IPC, display, console, power cabinet, etc., and the electrical components should be protected from water, dust and vibration. Therefore, entering the control room should first check whether the indoor environment is clea...
In recent years, the construction machinery industry has achieved rapid development, and concrete mixing plants have become an indispensable part of urban construction. The twin-shaft concrete mixers have also been used by more and more people. The twin-shaft concrete mixer is mainly used for the mixing of various powder materials. A variety of powdered mixing materials can be produced. The aggreg...
In concrete mixing plant equipment, cement silos are indispensable. If there is no cement silo, it will definitely affect the overall progress of the concrete mixing plant. Therefore, you should also pay attention to the following aspects when purchasing cement silos: 1.Whether the bottom of the supporting leg of the cement powder silo is welded firmly with the foundation embedded part, and whethe...
1.Powder weighing is slow Fault phenomenon: The powder is weighed very slowly, the weighing time is more than 2 minutes and the normal weighing is within 20 seconds. Cause Analysis : The influencing factors are mainly the poor feeding of the horizontal cement silo of the concrete batching plant and the damage of the screw conveyor. The forms of poor weighing of powder materials are as follows : po...
Copyright © 2015-2024 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com