Stabilized soil mixing plant is a mixture of various mixing materials to make stabilized soil. Stabilized soil can be applied to the base and sub-base of all levels of highways. So what should we pay attention to when the stable soil mixing plant is shut down? Let's take a brief look:

1.After shutdown, the materials in the mixer of the stabilized soil mixing plant should be cleaned up in time, and the materials in the finished hopper should be discharged in time. Close the cement silo valve and turn empty the powder in the screw conveyors to avoid the long-term shutdown and damp and blocked the screw .

2.Fasten the blades of the soil mixing plant and refuel the bearings. Remove the adhesive on the belt roller and clean the material that the belt has scattered to the ground in time.

3.In the rainy weather, pay attention to whether there is water around the control cabinet. It is necessary to promptly eliminate the water around the electrical control cabinet and the water around the motors.

4.The motor, reducer, air compressor, vibrator, etc. should be covered in rainy days to prevent rain.

5.The whole machine is usually painted once a year, and the whole machine oil is usually replaced once a year. The reducer is usually replaced once every six months.

6.Always check each belt roller. If there is no smooth rotation, it is necessary to repair it in time. Refer to the equipment manual for the lubrication time and the type of fuel to be added.

7.It is strictly forbidden to add gear oil to the electric drum when changing the oil. Because the gear oil will corrode the motor enameled wire. Generally add No. 46 mechanical oil. Or ordinary bulk motor oil. Diesel engine oil or transformer oil is also available. Generally such oils are relatively thin. Good insulation performance. Good heat dissipation.