(1) The raw materials used for concrete production are not a single homogeneous body with stable performance. During continuous production, external interference shall be eliminated and attention shall not be distracted; (2) During normal production, pay attention to the change of concrete slump, master the influence of water content adjustment on slump, have the right to adjust water content and ...
Today, we are in an era of rapid development of science and technology. All walks of life are changing to adapt to the times. In the concrete industry we are familiar with, various changes are also in full swing. 1. Architectural planning In order to build a concrete mixing station in line with the current development trend, the building planning at the beginning of the station is very important. ...
When the concrete mixing plant works, it must ensure that the electrical system can keep up with the work flow. Therefore, the performance requirements of the electrical system are also very high. What are the specific requirements? I will introduce them below. 1. During the production of the concrete batching plant, the entire work flow of the electrical control system is required to be ab...
1. What should we do when the raw materials cannot be stopped immediately and the supply of concrete cannot be interrupted? At the same time of contacting the raw material supplier, special personnel must be assigned to control the mixing water consumption and on-site concrete curing monitoring to prevent the construction site from adding water by itself. If necessary, the water binder ratio shall...
Copyright © 2015-2024 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com