rambo@xdmac.com
008615905062290Search
Symptom: Belt Conveyor in the no-load or load operation process, there is a side of the side of the deviation or a while and ran a run on the right side of the phenomenon, causing leakage, equipment, abnormal wear and damage, reduce productivity, and will affect the normal work of the whole concrete mixing plant. Cause analysis of concrete mixing plant : the tape received by the external forc...
（1）Adjust the tensioning mechanism When the belt is running of ready mixed concrete batching plant, if the load and heavy load in the case of the same side of the deviation, indicating the tightness on both sides of the belt is not the same, if the belt left and right deviation and no fixed direction, then the telt is loose, need to adjust the tensioning m...
Pay attention to cooling of concrete batching plant in summer days. During working process of concrete batching plant, it will generate much heat. The temperature of finished products is also very high. Therefore, users should pay attention to cooling of concrete batching plant, especially in summer days. When a machine works, its temperature also changes along with the temperature of environment....
1. The raw materials used in the production of the Concrete Batching Plant must be compatible with the mix proportion design. 2. All raw materials should be stored separately in the warehouse, each warehouse should be separated from the wall. The height of the wall should be sufficient to prevent the material from being mixed together. The ground set 2% drainage slope, and set up the drain in...
Copyright © 2015-2024 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com
