• 2021-08-16 17:50:36

Project background The large-scale pouring of large hydro power dams, nuclear power plants, high-speed railways and high-rise building foundations requires the use of temperature-controlled concrete. In the process of concrete mixing, the internal volume of concrete hydration heat increases, especially in the high temperature working conditions for mixing generated heat is higher, in the later cur...

• batching plant water chiller
• concrete cooling
• water cooling system

• 2021-08-23 16:47:16

1.mixer and batching system During the operation of the transmission system and equipment, the lubricating oil of each transmission gear, reduction gearbox and chain shall be fully added according to the regulations. At the same time, the equipment shall be inspected in detail to avoid problems in the operation process and affect the work efficiency. In case of bearing oil leakage, heating and bra...

• mixing arm
• water pump
• air compressor

• 2021-11-05 19:13:35

1. Equipped with multiple shaft end seal protection device, effectively prevent the occurrence of slurry leakage phenomenon; 2. The mixer monitoring system can monitor the working state of speed reducer, discharge pump and electric lubricating oil pump at any time; 3. Equipped with automatic lubrication system, using four independent pump cores respectively to the four shaft head directly supply o...

• speed reducer
• automatic lubrication system
• humidity sensor

• 2021-12-09 10:53:54

The cold climate and environmental conditions pose a severe challenge to the use of concrete mixing plant equipment. In order to make the mixing plant operate smoothly under bad weather conditions, how should we maintain the water supply system of concrete mixing plant in winter? Maintenance notes for water supply system of concrete mixing plant in winter: 1. The water pump shall be lubricated reg...

• concrete mixing plant equipment
• mixing plant
• water pump