rambo@xdmac.com
008615905062290Blog
The use of horizontal twin-shaft forced mixer, the shell with sufficient rigidity and strength to ensure strong mixing capacity, stirring evenly and quickly. It achieves good mixing effect for all kinds of dry concrete, semi-dry concrete and plastic concrete. The designed multi-angle stirring arms can avoid the phenomenon of concrete sticking on the shafts. When the motors working the mixing shaft...
With the rapid development of urbanization at home and abroad and the continuous improvement of highways, the demand for concrete increases year by year. In order to ensure the productivity of the ready mix concrete batching plant and the continuity of the equipment production, After equipment installation is completed, the debugging becomes a necessary step. When the commissioning of th...
1. Observation inquiry method Before the Concrete Mixing Plant maintenance, Preliminary analysis can be made according to the equipment life and the relevant models, asked the user what kind of repair and inspection have done before, and then make a thorough understanding and observe the phenomenon of failure carefully, make judgment, pay attention to wearing parts, use reliability....
1. The raw materials used in the production of the Concrete Batching Plant must be compatible with the mix proportion design. 2. All raw materials should be stored separately in the warehouse, each warehouse should be separated from the wall. The height of the wall should be sufficient to prevent the material from being mixed together. The ground set 2% drainage slope, and set up the drain in...
Pay attention to cooling of concrete batching plant in summer days. During working process of concrete batching plant, it will generate much heat. The temperature of finished products is also very high. Therefore, users should pay attention to cooling of concrete batching plant, especially in summer days. When a machine works, its temperature also changes along with the temperature of environment....
（1）Adjust the tensioning mechanism When the belt is running of ready mixed concrete batching plant, if the load and heavy load in the case of the same side of the deviation, indicating the tightness on both sides of the belt is not the same, if the belt left and right deviation and no fixed direction, then the telt is loose, need to adjust the tensioning m...
Symptom: Belt Conveyor in the no-load or load operation process, there is a side of the side of the deviation or a while and ran a run on the right side of the phenomenon, causing leakage, equipment, abnormal wear and damage, reduce productivity, and will affect the normal work of the whole concrete mixing plant. Cause analysis of concrete mixing plant : the tape received by the external forc...
Effectively improve the production efficiency of concrete mixing plant in five ways as follows: 1.According to the production capacity of concrete mixing plant and the distance of finished product transportation, line and road conditions, equipped with a sufficient number of transport vehicles, generally according to the number of productivity requirements of 1.2 times; 2.Factors affecting the pro...
Concrete batching plant in China after 20 years of development, technology more and more mature, from the original low efficiency, high energy consumption to todays’s high efficiency and low energy consumption. The concrete batching plant market is experiencing changes over and over again. With the real estate market boom continues, the concrete batching plant market is also heating up. Now the co...
I. Main motor of the mixer can’t be started Fault phenomenon Press the start button of the mixer on the console, the mixer does not start Reason Analysis of concrete mixing plant 1. The detecting protection switch of the mixer and the key-locked emergency stop switch of the main motor are not connected. 2. The emergency stop switch on the console is not reset. 3. The powe...
Copyright © 2015-2025 Fujian Xinda Machinery Co., Ltd..All Rights Reserved.Powered by dyyseo.com
